Contact Us

Foshan Zhongfayijia Furniture Co.,Ltd

Address:No.71 Guantian North Road, Longjiang, Shunde, Foshan, Guangdong, China 

Contact:Brige Liao 

TEL:86-757-23367775

FAX:86-757-23367775

Phone:+8613549962267

Email:brige_liao@aliyun.com

Home > News > Content
Computer Chair Maintenance Method Apr 12, 2017

Staff Chair

We know that the most common staff chair is the use of mesh cloth, so maintenance should pay attention to the following points:

Network Fabric Maintenance Method:

1. Found that the net cloth dust can be used to blow the hair dryer 1-2 minutes.

2. Found the net cloth dirty, suggested with wet towel, drops a drop of detergent, gently wipe in the dirty place 1 minutes can.

Chair Foot:

Because some staff chairs the use of metal plating on the foot, in the maintenance should pay attention to:

1. Do not use clean water wipe, apply dishcloth dip a little oil nursing;

2. Do not put the computer chairs in the light high temperature;

3. Often use fine flannel wipe the chair foot, keep the light;

4. Avoid friction and bump with other hard objects.

Boss Chair


Because the usual boss chairs are used in leather materials for fabrics, imported PU leather with the following characteristics:

1. High strength, thin and elastic, soft and smooth;

2. At low temperature can have a good tensile strength and curvature of the disturbance intensity, has a good light resistance to aging and water resistance, good stability;

3. Appearance and performance are close to natural leather, easy to wash decontamination, easy sewing;

4. Surface smooth and tight, can carry on a variety of surface treatment and dyeing;

5. No odor.

So the maintenance methods and precautions are as follows:

1. Dip water and detergent cleaning, avoid using gasoline scrubbing;

2. Do not dry cleaning. It is recommended that water wash should be used and not exceeding 40 °.

3. Do not put your love chair in the high-temperature strong light place;

4. Do not put your love chairs and some organic solvents together;

5.PU skin cannot be maintained like the normal cortex, do not use the market to buy the care agent (oil or Bi Lizhu, etc.) spray chairs. On weekdays there is dirt with damp flannel gently wipe can.

Chair Foot:

1. Due to some boss chairs on the foot of metal plating manufacturing, in the maintenance should pay attention to:

2. Do not use clean water wipe, apply dishcloth dip a little oil nursing;

3. Do not put the computer chairs in the light high temperature;

4. Often use fine flannel wipe the chair foot, keep the light;

5. Avoid friction and bump with other hard objects.